AVC-STL-31 - Fire Protection & Intumescent Coating Checklist
Buy 4 Checklists, Get 1 Free
BUY 4 ELIGIBLE SINGLES, GET 1 FREE
Where active, qualifying AVC individual Singles may receive the Pick 5, Pay for 4 cart promotion. Confirm at checkout; checklist packages and full H&S Files are purchased separately.
AVC-STL-31 | Fire Protection & Intumescent Coating Checklist
A practical structural-steel, fabrication, welding or erection inspection drawn from this exact original AVC-STL-31 editable Word checklist. The printed controls below govern the named work activity and its critical engineering, stability, workmanship and safety interfaces.
WHEN TO COMPLETE THIS TRADE CHECK
Use where structural steel requires fire-rated protection to verify substrate readiness, continuity, thickness-control evidence and vulnerable interfaces before enclosure.
ORIGINAL STEEL OR WELDING INSPECTION POINTS
1. Required fire rating and protection system are identified for each member / zone. 2. Steel primer / substrate is compatible with the selected fire protection system. 3. Structural connections and difficult geometries are accessible for full coverage. 4. Weld / bolt inspections are complete before fire protection is applied. 5. Environmental and substrate conditions suit the system. 6. Specified coat sequence / thickness control method is followed. 7. Flanges, webs, connection plates and bolt heads receive continuous protection where required. 8. Corners / edges / repairs receive adequate build-up.
REMAINING CONTROLS, HOLD AND RELEASE
9. Service brackets and later penetrations do not create unprotected structural steel. 10. Damage by following trades is identified and repaired. 11. Wet / dry film or thickness readings are recorded as applicable. 12. Product batch and application dates are traceable. 13. Repair areas are included in final inspection. 14. Fire-protection certificate / specialist sign-off is obtained where required. 15. Protected steel is released before ceilings / cladding conceal the work. The source provides inspection status OK / N/A / HOLD, project and zone references, evidence notes and a supervisor or checker RELEASE, HOLD or RE-CHECK decision before concealment or loading.
ENGINEERING, WELDING AND SAFETY LIMITS
Apply approved structural drawings, qualified fabrication/welding procedures, manufacturer instructions and site lifting, fire and work-at-height controls. This Word form cannot substitute for a structural engineer's release, welder qualification, verified NDT results or required formal testing.
INDIVIDUAL SINGLE, 93-RECORD PACKAGE OR FULL SAFETY FILE
The existing AVC-STL-31 editable Microsoft Word DOCX Single costs R12.95. The Structural Steel & Welding Checklists and Site Records Package brings together 93 specialist forms and talks. The Structural Steel Erection & Welding H&S File provides wider contractor management and specialist safety controls. Check existing full-file resources before repurchasing duplicate forms.
Browse Structural Steel & Welding Singles
