120 - AF-C03 | Airport Power Workface & SIMOPS Inspection
Buy 4 Checklists, Get 1 Free
AIRPORT EMERGENCY POWER RISK
Airport terminal UPS, emergency generators, switchgear and changeover equipment can backfeed supply after apparent isolation. Arc flash, hazardous battery energy, hydrogen, fuel and exhaust hazards interact with passenger-critical fire, security, IT and baggage loads. This source-original AVC field inspection record supports contractor evidence but cannot authorise operating transfers.
WHEN TO APPLY THE ORIGINAL
At the correctly approved terminal electrical/UPS work zone, identify the affected panel or generator, actual single-line diagram, essential circuits, competent electrician, permit and owner-approved changeover window. Verify isolation against every incoming source, batteries and automatic transfer, protect occupied-area supply, and establish a controlled temporary-power or load test plan.
ACTUAL PRINTED SAFETY CONTROLS
The source editable Word has 9 numbered workface or independent HOLD gates: 1. Confirm scope, asset identity, isolation boundary and drawings match the approved work order. 2. Verify airport/airfield permission and safety-interface briefing for the current work window. 3. Check personnel authorisation, trade competence and supervision/escort arrangements. 4. Backfeed — specific measures implemented and recorded. 5. arc flash — exclusion, barriers or protection verified. 6. Single-line diagram verification — physical condition checked with objective evidence. 7. competent switching — test/inspection or release requirements understood. 8. Other trades, aircraft/vehicle routes, public protection and FOD risks coordinated. 9. Stop work and notify the airport custodian if the workfront or system state changes.
TEST, HOLD AND SIGNATURE EVIDENCE
Record real source Y/N/N/A, EVIDENCE/DEFECT or HOLD findings, corrective action, named reviewer and independently issued airport system release reference. Leave untested protection open.
SYSTEM OWNER AND RE-ENERGISATION
Only the competent airport electrical systems authority may approve backfeed controls, switching, stored battery isolation, essential load transfer tests and system restoration. An AVC checklist is not an electrical certificate of compliance, energisation permit or guaranteed power-continuity test.
BUY SOURCE WORD OR COMPLETE AVC FILE
This exact original editable AVC Word is R12.95 individually and is already included in the complete 420-document Airports & Airside Checklist Package and full 659-page Airports Contractor H&S File. Avoid buying the same original twice. Eligible individual Singles may qualify for BUY 4 GET 1 FREE while the active automatic cart offer applies: five pay for four, ten for eight or fifteen for twelve. Confirm at checkout; package products are excluded.
